All materials
95 product lines in 13 categories. Every one can be sized, cut or bent to order.
Structural Steel Framing
Open category →Structural C-Stud (S-section)
Load-bearing and curtain-wall studs, 33–97 mil, cut to the 1/8" up to 40 ft.
Structural Track (T-section)
Top and bottom track for structural walls. 1-1/4" to 3" legs.
C-Joist / Rafter (S-section)
Floor joists, roof rafters and ceiling joists, 8"–14" deep, to 40 ft.
Joist Rim Track
Rim and end track for C-joist floors and roofs.
Built-Up Header (shop assembled)
Box or back-to-back headers, screwed together and ready to set.
Panelized Walls & CFS Trusses
Send the plans and we quote shop-built wall panels and trusses.
Custom Flashing, Coping & Trim
Open category →Parapet Coping Cap
Coping for any wall width, with drip kick and hemmed edges. Priced by girth.
Drip Cap / Head Flashing
Window and door head flashing with back leg, sloped top and drip.
Roof Drip Edge (T or L style)
Roof edge drip in T or L style, any size and color.
Counterflashing (surface mount or reglet)
Counterflashing over base flashing, surface-mounted with a sealant kick or set into a reglet.
Z-Flashing (horizontal joint)
Z-flashing for horizontal joints in panels, EIFS, siding and trim.
J-Trim / J-Channel
J-trim to receive panel, siding or board edges at openings and terminations.
Corner Trim (outside / inside)
Outside or inside corner trim, equal or unequal legs.
Sill Pan / Sill Flashing
Window and door sill pan with back dam and front drip. End dams available.
Gravel Stop / Fascia (roof edge)
Roof-edge gravel stop with fascia face and drip. Cleat sold separately.
Through-Wall Flashing with Drip
Masonry through-wall flashing with back leg and hemmed drip. Stainless, copper or galvanized.
Expansion Joint Cover
Metal expansion joint cover with center bump, any width.
Continuous Cleat / Hook Strip
Continuous cleat that the coping or fascia drip edge hooks onto.
Custom Flashing (your profile)
Draw any profile. Up to 16 bends, any angles. We bend it to the 1/16".
Scupper & Collector Box
Through-wall scuppers and collector heads, soldered or sealed.
Flat Sheet (painted, galvanized, aluminum, copper)
Flat stock for your own brake: 4×8 and 4×10 sheets.
Trim Coil (by the foot)
24" or 48" wide coil, cut to the foot. For field brakes and slitters.
EIFS Systems
Open category →EPS Insulation Board (EIFS grade)
EIFS-grade expanded polystyrene, 2' × 4' boards, 1" to 6". Flat or drainage-grooved.
Custom EPS Shapes & Trim (hot-wire cut)
Bands, sills, cornices, quoins and window surrounds cut to your profile.
Base Coat / Adhesive
Cementitious base coat and adhesive for EPS and mesh embedding.
Reinforcing Mesh (fiberglass)
Alkali-resistant fiberglass mesh: standard, intermediate, high impact, detail.
Acrylic Finish Coat (color matched)
100% acrylic textured finish, tinted to your color. 65–70 lb pails.
Tinted Primer (under finish)
Sanded primer tinted to the finish color. 5 gal.
Liquid Air & Water Barrier (EIFS)
Roll- or spray-applied air/water barrier over sheathing, plus joint treatment.
Sheathing Joint Mesh / Tape
Fiberglass joint mesh for sheathing joints and rough openings.
EIFS PVC Trims (starter, casing, expansion)
PVC starter track with weeps, casing beads, expansion joints, drip edges. 10 ft.
Insulation Fasteners & Plates
Plastic 2" plates and screws for mechanically fastened EPS and mineral wool.
Furring, Channels & Girts
Open category →Hat Channel (Furring Channel)
7/8" and 1-1/2" deep hat channel for walls, ceilings and panel sub-framing.
Z-Furring Channel
Z-furring for rigid insulation on masonry and concrete walls. 1" to 4" deep.
Structural Z-Girt (exterior CI / metal panel)
Heavy Z-girts for continuous insulation, rainscreens and metal panel walls.
Hat Girt (exterior, heavy gauge)
Deep hat girts for rainscreens and panel systems, 16–12 ga.
Cold-Rolled Channel (CRC / bridging)
3/4", 1-1/2" and 2" U-channel for bridging and suspended ceilings.
Resilient Channel (sound)
Single-leg resilient channel for STC-rated walls and ceilings.
Clips, Straps & Connectors
Open category →Flat Strap (bracing / blocking)
Galvanized flat strap for X-bracing, bridging and blocking. 1-1/2" to 6" wide.
Clip Angle (CFS)
Bent clip angles for stud-to-track, joist-to-beam and kicker connections.
Bypass Slide Clip (curtain wall)
Slotted clips that let bypass studs move with the floor slab.
Head-of-Wall Vertical Slide Clip
Vertical deflection clip for the head of in-fill walls.
Bridging Clip (CRC to stud)
Clip that ties 1-1/2" cold-rolled channel to each stud at the knockouts.
Web Stiffener (cut stud)
Stud or track pieces cut to joist depth for bearing stiffeners.
Gusset & Bearing Plate (sheared)
Flat plates sheared to size for truss gussets, track splices and bearing.
Joist Hanger / Track Hanger (CFS)
U-hangers for CFS joists into beams, headers and rim track.
Hold-Downs & Rated Connectors (by model)
Engineered hold-downs, rated clips and anchors. Give us the model numbers.
Interior Studs & Track
Open category →Interior Steel Stud (drywall)
Non-structural drywall studs, 25 ga, 20 EQ and 20 ga.
Interior Track (drywall)
Floor and ceiling runner for interior stud walls.
Slotted Deflection Track (head of wall)
2-1/2" deep slotted leg for ceiling deflection.
Shaft Wall CH-Stud & J-Track
CH studs and J-track for 1- and 2-hour shaft walls and stair enclosures.
Structural Steel (cut to length)
Open category →Steel Angle / Loose Lintel (cut to length)
Loose lintels, shelf and relieving angles, cut to length. Galvanized or primed.
HSS Steel Tube (square / rectangular)
A500 Grade C tube, 2" to 8", cut to length.
Steel Channel (C-shape)
American standard channel C3 to C12, cut to length.
Wide-Flange Beam (W-shape)
A992 W-beams W6 to W14, cut to length, flatbed delivery.
Steel Plate (cut to size)
A36 plate 3/16" to 1", sheared or burned to size. Embed and base plates.
Flat Bar (cut to length)
A36 flat bar 1" to 8" wide, 1/8" to 1/2" thick.
Miscellaneous Metals (from your shop drawings)
Embeds, lintels with plates, support frames, ladders, railings: quoted from drawings.
Metal Panel Accessories
Open category →Color-Matched Panel Screws (with EPDM washer)
Painted-head self-drilling screws with sealing washers, matched to panel colors.
Pop Rivets (painted or stainless)
Blind rivets for trim, flashing and panel joints.
Butyl Tape & Tube Sealant
Butyl tape for panel laps, trim and flashing joints.
Foam Closure Strips
Inside, outside and universal closures for ribbed and corrugated panels.
Touch-Up Paint (Kynar colors)
Touch-up paint pens and bottles matched to the color chart.
Rainscreen Clip & Rail Systems (by spec)
Thermally broken clip-and-rail systems for ACM, terracotta, fiber cement.
Stucco & Lath
Open category →Expanded Metal Lath
Diamond mesh and 3/8" rib lath, galvanized or painted, self-furred.
Woven Wire Stucco Netting
17 ga 1" woven wire, self-furred, with or without paper backing.
Stucco Accessories (screeds, beads, joints)
Weep screed, casing bead, control and expansion joints, corner aid. 10 ft.
Stucco Mixes & Cement
Scratch & brown base, one-coat, finish coat, portland, masonry cement, lime.
Bonding Agent, Admix & Fiber
Acrylic bonding agent, acrylic admix, alkali-resistant fiber.
Air/Water Barriers & Insulation
Open category →Building Wrap & Grade D Paper
House wrap, commercial wrap, drainable wrap, and 2-ply Grade D paper.
Self-Adhered Flashing Membrane
Rubberized-asphalt or butyl flashing tape, 4" to 36" wide, 75 ft rolls.
Liquid Flashing, Transition Membrane & Primer
Gun-grade liquid flashing, silicone transition sheets, membrane primer.
Mineral Wool Exterior Board (CI)
Rigid stone wool board for continuous insulation and rainscreens. 2' × 4'.
Rigid Foam Board (polyiso / XPS)
Foil-faced polyiso and XPS, 4' × 8'.
Drainage Mat, Term Bar & Safing
Rainscreen drainage mat, aluminum termination bar, mineral wool safing.
Sealants & Backer Rod
Open category →Polyurethane Sealant (construction grade)
One-part polyurethane for control joints, perimeters, panel and precast joints.
Silicone Sealant (low modulus, neutral cure)
Low-modulus silicone for EIFS, curtain wall and high-movement joints.
Hybrid / MS Polymer, Butyl & Firestop Sealants
Hybrid polymer, butyl rubber, intumescent firestop.
Closed-Cell Backer Rod
Closed-cell polyethylene backer rod, 1/4" to 2". Spools and coils.
Sealant Primer, Bond Breaker & Cleaner
Primers for porous and metal surfaces, bond-breaker tape, joint cleaner.
Fasteners & Anchors
Open category →Framing Screws (steel-to-steel)
#8 and #10 self-drilling framing screws: modified truss, pan and hex heads.
Sheathing, Drywall & Lath Screws
Wafer-head winged screws for sheathing, bugle-head drywall screws, lath screws.
Powder-Actuated Pins, Loads & Gas Pins
Track pins with washers, .27 cal strip loads, gas pins with fuel.
Concrete Screws (masonry)
3/16" and 1/4" concrete screws, hex or flat head, box of 100.
Wedge, Screw & Drop-In Anchors
Wedge anchors, heavy-duty screw anchors and drop-ins, zinc, galvanized or stainless.
Anchoring Adhesive, Threaded Rod & Hardware
Epoxy anchoring adhesive, threaded rod, nuts and washers.
Tools & Jobsite Supplies
Open category →Cut-Off Wheels & Saw Blades
Abrasive wheels, metal-cutting blades for studs and track.
Driver Bits & Nut Setters
Magnetic nut setters, #2 bits, extension holders.
Snips, Crimpers, Clamps & Hand Seamers
Hand tools for steel framing and sheet metal.
EIFS & Stucco Hand Tools
Rasps, stainless trowels, hawks, mixing paddles.
Caulk Guns
Heavy-duty cartridge and sausage guns.
Layout: Chalk, Levels, Tape
Chalk lines, magnetic levels, tapes, markers.
Safety: Gloves, Glasses, Vests
Cut-resistant gloves, glasses, hi-vis vests.
Jobsite Supplies: Poly, Tape, Blades
Poly sheeting, masking, utility blades.
Special Order: Anything Else
Don't see it? Describe it, and we find it in NYC and bring it up with your order.