EIFS Systems
EPS, base coat, mesh, finish, air/water barrier, trims and custom foam shapes.
EPS Insulation Board (EIFS grade)
EIFS-grade expanded polystyrene, 2' × 4' boards, 1" to 6". Flat or drainage-grooved.
Custom EPS Shapes & Trim (hot-wire cut)
Bands, sills, cornices, quoins and window surrounds cut to your profile.
Base Coat / Adhesive
Cementitious base coat and adhesive for EPS and mesh embedding.
Reinforcing Mesh (fiberglass)
Alkali-resistant fiberglass mesh: standard, intermediate, high impact, detail.
Acrylic Finish Coat (color matched)
100% acrylic textured finish, tinted to your color. 65–70 lb pails.
Tinted Primer (under finish)
Sanded primer tinted to the finish color. 5 gal.
Liquid Air & Water Barrier (EIFS)
Roll- or spray-applied air/water barrier over sheathing, plus joint treatment.
Sheathing Joint Mesh / Tape
Fiberglass joint mesh for sheathing joints and rough openings.
EIFS PVC Trims (starter, casing, expansion)
PVC starter track with weeps, casing beads, expansion joints, drip edges. 10 ft.
Insulation Fasteners & Plates
Plastic 2" plates and screws for mechanically fastened EPS and mineral wool.