Custom Flashing, Coping & Trim
Brake-formed to your dimensions in 24 ga Kynar, aluminum, stainless or copper.
Parapet Coping Cap
Coping for any wall width, with drip kick and hemmed edges. Priced by girth.
Drip Cap / Head Flashing
Window and door head flashing with back leg, sloped top and drip.
Roof Drip Edge (T or L style)
Roof edge drip in T or L style, any size and color.
Counterflashing (surface mount or reglet)
Counterflashing over base flashing, surface-mounted with a sealant kick or set into a reglet.
Z-Flashing (horizontal joint)
Z-flashing for horizontal joints in panels, EIFS, siding and trim.
J-Trim / J-Channel
J-trim to receive panel, siding or board edges at openings and terminations.
Corner Trim (outside / inside)
Outside or inside corner trim, equal or unequal legs.
Sill Pan / Sill Flashing
Window and door sill pan with back dam and front drip. End dams available.
Gravel Stop / Fascia (roof edge)
Roof-edge gravel stop with fascia face and drip. Cleat sold separately.
Through-Wall Flashing with Drip
Masonry through-wall flashing with back leg and hemmed drip. Stainless, copper or galvanized.
Expansion Joint Cover
Metal expansion joint cover with center bump, any width.
Continuous Cleat / Hook Strip
Continuous cleat that the coping or fascia drip edge hooks onto.
Custom Flashing (your profile)
Draw any profile. Up to 16 bends, any angles. We bend it to the 1/16".
Scupper & Collector Box
Through-wall scuppers and collector heads, soldered or sealed.
Flat Sheet (painted, galvanized, aluminum, copper)
Flat stock for your own brake: 4×8 and 4×10 sheets.
Trim Coil (by the foot)
24" or 48" wide coil, cut to the foot. For field brakes and slitters.